Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA1990626 L4-2184CC 2.2L SOHC F2REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTIGNITION SYSTEMSPECIFICATIONSMECHANICAL SPECIFICATIONS
1990 Mazda 626 L4-2184cc 2.2L SOHC F2
Mechanical Specifications
1990 Mazda 626 L4-2184cc 2.2L SOHC F2SECTION Mechanical Specifications
IDLE SPEED 750 ± 25 rpm [1]
FIRING ORDER 1-3-4-2
DISTRIBUTOR LOCK BOLT TORQUE 14 - 19 ftlb (19 - 25 Nm)
SPARK PLUG TORQUE 11 - 17 ftlb (15 - 23 Nm)
SPARK PLUG GAP 0.039 - 0.043 in (1.0 - 1.1 mm)
RECOMMENDED SPARK PLUGS
NGK ZFR5F-11 / ZFR6F-11 / ZFR7F-11
Nippon Denso KJ16CR11 / KJ20CR11 / KJ22CR11
[1] Test connector grounded.
FIRING ORDER 1-3-4-2
DISTRIBUTOR LOCK BOLT TORQUE 14 - 19 ftlb (19 - 25 Nm)
SPARK PLUG TORQUE 11 - 17 ftlb (15 - 23 Nm)
SPARK PLUG GAP 0.039 - 0.043 in (1.0 - 1.1 mm)
RECOMMENDED SPARK PLUGS
NGK ZFR5F-11 / ZFR6F-11 / ZFR7F-11
Nippon Denso KJ16CR11 / KJ20CR11 / KJ22CR11
[1] Test connector grounded.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.