Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLINCOLN2006TOWN CAR V8-4.6L VIN V FLEX FUELREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSHEATING AND AIR CONDITIONINGSYSTEM SPECIFICATIONSCLIMATE CONTROL SYSTEMGENERAL SPECIFICATIONS
2006 Lincoln Town Car V8-4.6L VIN V Flex Fuel
General Specifications
2006 Lincoln Town Car V8-4.6L VIN V Flex FuelSECTION General Specifications
Item Specification
A/C Compressor
Type Visteon FS18
Displacement 180 cc (11 cu in)
A/C Pressure Relief Valve(a)
Open pressures 3,432-4,138 kPa (498-600 psi)
Evaporator Core Orifice
Color Orange
Diameter 1.45 mm (0.057 in)
Magnetic Clutch
Air gap clearance 0.35-0.65 mm (0.014-0.026 in)
A/C Cycling Switch
Open pressure 159 kPa (23 psi)
Close pressure 290 kPa (42 psi)
Refrigerant Lubricant and Capacity
PAG Refrigerant Compressor Oil (R-134a Systems) YN-12-D WSH-M1C231-B
Capacity 207 ml (7 oz)
Refrigerant and Capacity
R-134a Refrigerant YN-19 WSH-M17B19-A
Capacity 0.651 kg (23 oz)
(a) Manifold gauge set pressures may vary slightly depending on the distance between the service gauge port valve and the A/C pressure relief valve or low charge protection switch.
A/C Compressor
Type Visteon FS18
Displacement 180 cc (11 cu in)
A/C Pressure Relief Valve(a)
Open pressures 3,432-4,138 kPa (498-600 psi)
Evaporator Core Orifice
Color Orange
Diameter 1.45 mm (0.057 in)
Magnetic Clutch
Air gap clearance 0.35-0.65 mm (0.014-0.026 in)
A/C Cycling Switch
Open pressure 159 kPa (23 psi)
Close pressure 290 kPa (42 psi)
Refrigerant Lubricant and Capacity
PAG Refrigerant Compressor Oil (R-134a Systems) YN-12-D WSH-M1C231-B
Capacity 207 ml (7 oz)
Refrigerant and Capacity
R-134a Refrigerant YN-19 WSH-M17B19-A
Capacity 0.651 kg (23 oz)
(a) Manifold gauge set pressures may vary slightly depending on the distance between the service gauge port valve and the A/C pressure relief valve or low charge protection switch.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.