Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2012CT 200H L4-1.8L (2ZR-FXE) HYBRIDREPAIR AND DIAGNOSISSTARTING AND CHARGINGSTARTING SYSTEMSTART / STOP SWITCHTESTING AND INSPECTION
2012 Lexus CT 200h L4-1.8L (2ZR-FXE) Hybrid
Start / Stop Switch: Testing and Inspection
2012 Lexus CT 200h L4-1.8L (2ZR-FXE) HybridSECTION Testing and Inspection
2ZR-FXE STARTING: POWER SWITCH: INSPECTION
1. INSPECT POWER SWITCH
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the power switch.
(b) Apply battery voltage between the terminals of the switch, and check the illumination condition of the power switch.
Text in Illustration
Standard Resistance:
If the result is not as specified, replace the power switch.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.