Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2012CT 200H L4-1.8L (2ZR-FXE) HYBRIDREPAIR AND DIAGNOSISSTARTING AND CHARGINGSTARTING SYSTEMSTART / STOP SWITCHSERVICE AND REPAIRINSTALLATION
2012 Lexus CT 200h L4-1.8L (2ZR-FXE) Hybrid
Installation
2012 Lexus CT 200h L4-1.8L (2ZR-FXE) HybridSECTION Installation
2ZR-FXE STARTING: POWER SWITCH: INSTALLATION
1. INSTALL POWER SWITCH
(a) Engage the 2 claws to install the power switch.
2. INSTALL METER HOOD SUB-ASSEMBLY Installation
3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
4. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE Installation
5. INSTALL DECK FLOOR BOX RH Installation
6. INSTALL REAR NO. 3 FLOOR BOARD Installation
7. INSTALL REAR DECK FLOOR BOX Installation
8. INSTALL REAR NO. 2 FLOOR BOARD Installation
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.