Installation

2012 Lexus CT 200h L4-1.8L (2ZR-FXE) HybridSECTION Installation




HEATING / AIR CONDITIONING: AIR CONDITIONING AMPLIFIER: INSTALLATION

1. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY

(a) Engage the guide as shown in the illustration.





(b) Engage the guide and install the air conditioning amplifier assembly as shown in the illustration.





(c) Install the screw and connect each connector.





2. INSTALL CONSOLE BOX INSERT Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE Installation

5. INSTALL DECK FLOOR BOX RH Installation

6. INSTALL REAR NO. 3 FLOOR BOARD Installation

7. INSTALL REAR DECK FLOOR BOX Installation

8. INSTALL REAR NO. 2 FLOOR BOARD Installation
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.