Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2012CT 200H L4-1.8L (2ZR-FXE) HYBRIDREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSACCELERATOR PEDAL POSITION SENSORSERVICE AND REPAIRREMOVAL
2012 Lexus CT 200h L4-1.8L (2ZR-FXE) Hybrid
Removal
2012 Lexus CT 200h L4-1.8L (2ZR-FXE) HybridSECTION Removal
HYBRID / BATTERY CONTROL: ACCELERATOR PEDAL SENSOR: REMOVAL
1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY
(a) Disconnect the accelerator pedal sensor assembly connector.
(b) Remove the 2 bolts and accelerator pedal sensor assembly.
NOTICE:
* Avoid physical shock to the accelerator pedal sensor assembly.
* Do not disassemble the accelerator pedal sensor assembly.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.