Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2012CT 200H L4-1.8L (2ZR-FXE) HYBRIDREPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGCONTROL ASSEMBLYSERVICE AND REPAIRREMOVAL
2012 Lexus CT 200h L4-1.8L (2ZR-FXE) Hybrid
Removal
2012 Lexus CT 200h L4-1.8L (2ZR-FXE) HybridSECTION Removal
HEATING / AIR CONDITIONING: AIR CONDITIONING PANEL: REMOVAL
1. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL Removal
2. REMOVE AIR CONDITIONING CONTROL ASSEMBLY
(a) Disengage the 7 claws and remove the air conditioning control assembly as shown in the illustration.
(b) Disconnect the connector.
3. REMOVE LOWER HEATER CONTROL BASE
(a) Remove the 8 screws and remove the lower heater control base.
4. REMOVE CENTER CLUSTER MODULE CIRCUIT
NOTICE:
When disassembling the center cluster module circuit, eliminate static electricity by touching the vehicle body to prevent electrical components from being damaged.
(a) Disengage the 2 guides and remove the center cluster module circuit.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.