Installation

2012 Lexus CT 200h L4-1.8L (2ZR-FXE) HybridSECTION Installation




HEATING / AIR CONDITIONING: AIR CONDITIONING PANEL: INSTALLATION

1. INSTALL CENTER CLUSTER MODULE CIRCUIT

(a) Engage the 2 guides and install the center cluster module circuit.

2. INSTALL LOWER HEATER CONTROL BASE

(a) Install the lower heater control base with the 8 screws.

3. INSTALL AIR CONDITIONING CONTROL ASSEMBLY

(a) Connect the connector.

(b) Engage the 7 claws to install the air conditioning control assembly.





4. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL Installation
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.