SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2012CT 200H L4-1.8L (2ZR-FXE) HYBRIDREPAIR AND DIAGNOSISBODY AND FRAMESEATSMEMORY POSITIONING SYSTEMSMEMORY POSITIONING SWITCHSERVICE AND REPAIRREMOVAL
2012 Lexus CT 200h L4-1.8L (2ZR-FXE) Hybrid

Removal

2012 Lexus CT 200h L4-1.8L (2ZR-FXE) HybridSECTION Removal




SEAT: SEAT MEMORY SWITCH: REMOVAL

1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG Disassembly

2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH Disassembly

3. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side) Disassembly

4. REMOVE DOOR ARMREST COVER (for Driver Side) Disassembly

5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Driver Side) Disassembly

6. REMOVE DOOR ASSIST GRIP COVER (for Front Passenger Side) Disassembly

7. REMOVE DOOR ASSIST GRIP ASSEMBLY (for Front Passenger Side) Disassembly

8. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side) Disassembly

9. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Front Passenger Side) Disassembly

10. REMOVE SEAT MEMORY SWITCH

(a) Disconnect the connector.





(b) Disengage the 4 claws and remove the seat memory switch.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.