Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2012CT 200H L4-1.8L (2ZR-FXE) HYBRIDREPAIR AND DIAGNOSISBODY AND FRAMERELAYS AND MODULES - BODY AND FRAMEPOWER MIRROR CONTROL MODULESERVICE AND REPAIRINSTALLATION
2012 Lexus CT 200h L4-1.8L (2ZR-FXE) Hybrid
Installation
2012 Lexus CT 200h L4-1.8L (2ZR-FXE) HybridSECTION Installation
MIRROR (EXT): OUTER MIRROR CONTROL ECU: INSTALLATION
1. INSTALL OUTER MIRROR CONTROL ECU ASSEMBLY
(a) Install the outer mirror control ECU assembly with the 2 screws.
(b) Connect each connector.
2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Driver Side) Reassembly
3. INSTALL DOOR ARMREST COVER (for Driver Side) Reassembly
4. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side) Reassembly
5. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Front Passenger Side) Reassembly
6. INSTALL DOOR ASSIST GRIP ASSEMBLY (for Front Passenger Side) Reassembly
7. INSTALL DOOR ASSIST GRIP COVER (for Front Passenger Side) Reassembly
8. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side) Reassembly
9. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH Reassembly
10. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG Reassembly
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.