Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2012CT 200H L4-1.8L (2ZR-FXE) HYBRIDREPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTRADIO, STEREO, AND COMPACT DISCTESTING AND INSPECTIONSYMPTOM RELATED DIAGNOSTIC PROCEDURESAUDIO AND VISUAL SYSTEM (W/ NAVIGATION SYSTEM)SATELLITE RADIO BROADCAST CANNOT BE SELECTED OR BROADCAST CANNOT BE ADDED INTO MEMORY
2012 Lexus CT 200h L4-1.8L (2ZR-FXE) Hybrid
Satellite Radio Broadcast Cannot Be Selected or Broadcast Cannot Be Added Into Memory
2012 Lexus CT 200h L4-1.8L (2ZR-FXE) HybridSECTION Satellite Radio Broadcast Cannot Be Selected or Broadcast Cannot Be Added Into Memory
AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (w/ Navigation System): Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory
- Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory
INSPECTION PROCEDURE
NOTICE:
* Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, the broadcast will not be able to be listened to or viewed.
* After replacing the radio receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary.
PROCEDURE
1. CHECK RADIO RECEIVER ASSEMBLY
(a) Check radio condition.
Result:
B -- CHECK RADIO RECEIVER ASSEMBLY
A -- ADD PRESET CHANNEL INTO MEMORY AGAIN
2. CHECK RADIO RECEIVER ASSEMBLY
(a) Check the number of preset channels.
Result:
B -- CHECK AUXILIARY BATTERY
A -- END (ONLY 18 CHANNELS CAN BE PRESET)
3. CHECK AUXILIARY BATTERY
(a) Check if the auxiliary battery was replaced.
OK:
Auxiliary battery was not replaced.
NG -- ADD PRESET CHANNEL INTO MEMORY AGAIN
OK -- REPLACE RADIO RECEIVER ASSEMBLY Removal
4. ADD PRESET CHANNEL INTO MEMORY AGAIN
(a) Check if the preset channels that have been cleared can be added into memory again.
OK:
Preset channels can be added into memory.
NG -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table
OK -- END
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.