Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2012CT 200H L4-1.8L (2ZR-FXE) HYBRIDREPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTRADIO, STEREO, AND COMPACT DISCTESTING AND INSPECTIONCOMPONENT TESTS AND GENERAL DIAGNOSTICSAUDIO AND VISUAL SYSTEM (W/ NAVIGATION SYSTEM)SOUND SIGNAL CIRCUIT BETWEEN MULTI-MEDIA INTERFACE ECU AND STEREO JACK ADAPTER
2012 Lexus CT 200h L4-1.8L (2ZR-FXE) Hybrid
Sound Signal Circuit Between Multi-Media Interface ECU and Stereo Jack Adapter
2012 Lexus CT 200h L4-1.8L (2ZR-FXE) HybridSECTION Sound Signal Circuit Between Multi-Media Interface ECU and Stereo Jack Adapter
AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (w/ Navigation System): Sound Signal Circuit between Multi-media Interface ECU and Stereo Jack Adapter
- Sound Signal Circuit between Multi-media Interface ECU and Stereo Jack Adapter
DESCRIPTION
The No. 1 stereo jack adapter assembly sends the sound data from an external device to the multi-media interface ECU assembly through this circuit.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. CHECK HARNESS AND CONNECTOR
(a) Disconnect the multi-media interface ECU assembly connector and No. 1 stereo jack adapter assembly connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.