Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2012CT 200H L4-1.8L (2ZR-FXE) HYBRIDREPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTNAVIGATION SYSTEMNAVIGATION FUNCTION SELECTOR SWITCHTESTING AND INSPECTION
2012 Lexus CT 200h L4-1.8L (2ZR-FXE) Hybrid
Navigation Function Selector Switch: Testing and Inspection
2012 Lexus CT 200h L4-1.8L (2ZR-FXE) HybridSECTION Testing and Inspection
NAVIGATION / MULTI INFO DISPLAY: MULTI-DISPLAY SWITCH: INSPECTION
1. INSPECT MULTI-DISPLAY SWITCH
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) Check the illumination
(1) Connect a positive (+) lead to terminal ILL+ and a negative (-) lead from the auxiliary battery to terminal ILL- of the multi-display switch connector.
(2) Check that the multi-display switch illumination comes on.
OK:
Multi-display switch illumination comes on.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.