Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2011HS 250H L4-2.4L (2AZ-FXE) HYBRIDREPAIR AND DIAGNOSISBODY AND FRAMESEATSSEAT TEMPERATURE CONTROL MODULESERVICE AND REPAIRREMOVAL
2011 Lexus HS 250h L4-2.4L (2AZ-FXE) Hybrid
Removal
2011 Lexus HS 250h L4-2.4L (2AZ-FXE) HybridSECTION Removal
SEAT: SEAT HEATER CONTROL: REMOVAL
1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT Removal
2. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER Removal
3. REMOVE FRONT INNER SEAT TRACK BRACKET COVER Removal
4. REMOVE REAR OUTER SEAT TRACK BRACKET COVER Removal
5. REMOVE REAR INNER SEAT TRACK BRACKET COVER Removal
6. REMOVE FRONT SEAT ASSEMBLY Removal
7. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY
(a) Disconnect the 2 connectors.
Text in Illustration
(b) Disengage the 2 clamps and remove the seat heater control sub-assembly.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.