Smart Access System With Push-Button Start (for Start Function)

2011 Lexus HS 250h L4-2.4L (2AZ-FXE) HybridSECTION Smart Access System With Push-Button Start (for Start Function)




THEFT DETERRENT / KEYLESS ENTRY: SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function): ON-VEHICLE INSPECTION

1. CHECK POWER SOURCE MODE CHANGE FUNCTION

(a) Check the function of the power switch.

(1) Check that the power source mode changes in accordance with the conditions of the shift state and brake pedal.





2. CHECK INDICATOR CONDITION





(a) Check the indicator light on the power switch.

(1) Check that the power switch indicator turns on and changes color according to the table below.





RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.