Removal

2009 Lexus ES 350 V6-3.5L (2GR-FE)SECTION Removal







U660E AUTOMATIC TRANSAXLE: TCM:

REMOVAL
NOTE:
When the TCM is replaced, the existing transaxle compensation codes must be input into a new TCM Registration.

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal
2. REMOVE BATTERY Removal
3. REMOVE AIR CLEANER INLET ASSEMBLY Removal
4. REMOVE NO. 1 AIR CLEANER INLET Removal
5. REMOVE INTAKE AIR RESONATOR SUB-ASSEMBLY Removal
6. REMOVE TCM





(a) Turn the lock lever and disconnect the connector from the TCM.





(b) Remove the 2 bolts and TCM from the transaxle.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.