Installation

2009 Lexus ES 350 V6-3.5L (2GR-FE)SECTION Installation







U660E AUTOMATIC TRANSAXLE: TCM:

INSTALLATION

1. INSTALL TCM
(a) Install the TCM to the transaxle.





(b) Install and tighten the 2 bolts in the order shown in the illustration.
Torque: 11 Nm (115 kgf-cm, 8 ft-lbf)





(c) Connect the connector to the TCM.
(d) Turn the lock lever and secure the connector with the lock lever.
2. INSTALL INTAKE AIR RESONATOR SUB-ASSEMBLY Installation
3. INSTALL NO. 1 AIR CLEANER INLET Installation
4. INSTALL AIR CLEANER INLET ASSEMBLY Installation
5. INSTALL BATTERY Installation
6. INSTALL COOL AIR INTAKE DUCT SEAL Installation
7. PERFORM TCM REGISTRATION
HINT: Registration

8. PERFORM INITIALIZATION
(a) Perform initialization procedure Repair Instruction - Initialization.
NOTE:
Some systems need initialization after reconnecting the cable to the negative battery terminal.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.