Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2009ES 350 V6-3.5L (2GR-FE)REPAIR AND DIAGNOSISSTEERING AND SUSPENSIONSTEERINGSTEERING COLUMNTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESFREEZE FRAME DATA
2009 Lexus ES 350 V6-3.5L (2GR-FE)
Freeze Frame Data
2009 Lexus ES 350 V6-3.5L (2GR-FE)SECTION Freeze Frame Data
STEERING COLUMN: POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM: FREEZE FRAME DATA
FREEZE FRAME DATA
1. FREEZE FRAME DATA
(a) Turn the engine switch off.
(b) Connect Techstream to the DLC3.
(c) Turn the engine switch on (IG).
(d) Turn Techstream on.
(e) Check the freeze frame data. Enter the following menus: Chassis / Tilt&Telescopic / Utility / Freeze Frame Data.
Tilt&Telescopic:
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.