Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2009ES 350 V6-3.5L (2GR-FE)REPAIR AND DIAGNOSISRESTRAINTS AND SAFETY SYSTEMSSEAT BELT SYSTEMSSEAT BELT CONTROL MODULESERVICE AND REPAIRREMOVAL
2009 Lexus ES 350 V6-3.5L (2GR-FE)
Removal
2009 Lexus ES 350 V6-3.5L (2GR-FE)SECTION Removal
SEAT BELT: SEAT BELT CONTROL ECU:
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Service Precautions.
2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
3. REMOVE SPARE WHEEL COVER TRAY
4. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY Disassembly
5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Disassembly
6. REMOVE REAR FLOOR FINISH PLATE Disassembly
7. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH Disassembly
8. REMOVE SEAT BELT CONTROL ECU
(a) Disconnect the connector.
(b) Remove the 2 bolts.
(c) Disengage the claw and clip and remove the seat belt control ECU.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.