SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2009ES 350 V6-3.5L (2GR-FE)REPAIR AND DIAGNOSISRESTRAINTS AND SAFETY SYSTEMSSEAT BELT SYSTEMSSEAT BELT CONTROL MODULESERVICE AND REPAIRINSTALLATION
2009 Lexus ES 350 V6-3.5L (2GR-FE)

Installation

2009 Lexus ES 350 V6-3.5L (2GR-FE)SECTION Installation







SEAT BELT: SEAT BELT CONTROL ECU:

INSTALLATION

1. INSTALL SEAT BELT CONTROL ECU





(a) Engage the claw.
(b) Engage the clip.
(c) Install the seat belt control ECU with the 2 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
(d) Connect the connector.
2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH Reassembly
3. INSTALL REAR FLOOR FINISH PLATE Reassembly
4. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Reassembly
5. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY Reassembly
6. INSTALL SPARE WHEEL COVER TRAY
7. INSTALL LUGGAGE COMPARTMENT FLOOR MAT
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9. PERFORM INITIALIZATION
NOTE:
Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.

10. INSPECT SRS WARNING LIGHT Diagnosis System
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.