Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2009ES 350 V6-3.5L (2GR-FE)REPAIR AND DIAGNOSISMAINTENANCESERVICE INTERVALSMAINTENANCE INDICATOR RESETWITHOUT NAVIGATION SYSTEM
2009 Lexus ES 350 V6-3.5L (2GR-FE)
Without Navigation System
2009 Lexus ES 350 V6-3.5L (2GR-FE)SECTION Without Navigation System
Resetting The Oil Change System
1. Turn the "Engine Start Stop" switch OFF with the trip meter A reading shown.
2. While pressing the trip meter reset button, set the "Engine Start Stop" switch to the IGNITION ON mode. Continue to press and hold the button until the trip meter displays 000000.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.