Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2009ES 350 V6-3.5L (2GR-FE)REPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGBLOWER MOTORSERVICE AND REPAIRDISASSEMBLY
2009 Lexus ES 350 V6-3.5L (2GR-FE)
Disassembly
2009 Lexus ES 350 V6-3.5L (2GR-FE)SECTION Disassembly
AIR CONDITIONING: BLOWER UNIT: DISASSEMBLY
DISASSEMBLY
1. REMOVE AIR DUCT SUB-ASSEMBLY
(a) Release the 4 claws and remove the air duct sub-assembly.
2. REMOVE AIR FILTER COVER PLATE
(a) Release the 2 claws and remove the air filter cover plate.
3. REMOVE CLEAN AIR FILTER
(a) Remove the clean air filter as shown in the illustration.
4. REMOVE AIR INLET SERVO MOTOR
(a) Remove the 3 screws and air inlet servo motor.
5. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY
(a) Remove the 3 screws and blower with fan motor sub-assembly.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.