Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS2009ES 350 V6-3.5L (2GR-FE)REPAIR AND DIAGNOSISBODY AND FRAMELOCKSPOWER LOCKSTESTING AND INSPECTIONSYMPTOM RELATED DIAGNOSTIC PROCEDURESSMART ACCESS SYSTEM WITH PUSH-BUTTON START
2009 Lexus ES 350 V6-3.5L (2GR-FE)
Smart Access System With Push-Button Start
2009 Lexus ES 350 V6-3.5L (2GR-FE)SECTION Smart Access System With Push-Button Start
DOOR LOCK: SMART ACCESS SYSTEM WITH PUSH-BUTTON START:
PROBLEM SYMPTOMS TABLE
HINT:
- Use the table below to help determine the cause of the problem symptoms. The potential causes of the symptoms are listed in order of probability in the "Suspected area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
SMART KEY SYSTEM (ENTRY):
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.