Installation

2009 Lexus ES 350 V6-3.5L (2GR-FE)SECTION Installation







ENGINE IMMOBILIZER: ID CODE BOX:

INSTALLATION

1. INSTALL ID CODE BOX (IMMOBILIZER CODE ECU)





(a) Connect the connector.
(b) Engage the 3 claws and install the ID code box (immobilizer code ECU).
NOTE:
Be careful when installing the ID code box (immobilizer code ECU). If the ID code box (immobilizer code ECU) is dropped, replace it with a new one.

2. INSTALL AIR CONDITIONER UNIT ASSEMBLY
HINT: Refer to the procedure for Install Air Conditioner Unit Assembly Installation.

3. REGISTER ECU COMMUNICATION ID
NOTE:
When replacing the ID code box (immobilizer code ECU), perform initialization Engine Immobilizer System.

4. REGISTER KEY
NOTE:
When replacing the ID code box (immobilizer code ECU), perform initialization Engine Immobilizer System.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.