Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS1999RX 300 AWD V6-3.0L (1MZ-FE)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSOIL PUMP
1999 Lexus RX 300 AWD V6-3.0L (1MZ-FE)
Oil Pump
1999 Lexus RX 300 AWD V6-3.0L (1MZ-FE)SECTION Oil Pump
Oil Pump Specifications
Side Clearance
Standard 0.030-0.090 mm
Maximum 0.15 mm
Body Clearance
Standard 0.250-0.325 mm
Maximum 0.30 mm
Tip Clearance
Standard 0.110-0.240 mm
Maximum 0.35 mm
Oil Pump Bolt Torque
10 mm Head 8 Nm
12 mm Head 19.5 Nm
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.