Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS1999RX 300 AWD V6-3.0L (1MZ-FE)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSDIFFERENTIAL ASSEMBLYSYSTEM SPECIFICATIONSDIFFERENTIAL TORQUE DATAFRONT
1999 Lexus RX 300 AWD V6-3.0L (1MZ-FE)
Front
1999 Lexus RX 300 AWD V6-3.0L (1MZ-FE)SECTION Front
SERVICE SPECIFICATIONS
Total Preload:
Drive Pinion Preload Plus 0.3-0.5 Nm (2.6-4.3 ft. lbs.)
TORQUE SPECIFICATIONS
Filler Plug 49 Nm (36 ft. lbs.)
Breather Plug 21 Nm (15 ft. lbs.)
Oil Deflector Set Bolt 7.4 Nm (65 inch lbs.)
Total Preload:
Drive Pinion Preload Plus 0.3-0.5 Nm (2.6-4.3 ft. lbs.)
TORQUE SPECIFICATIONS
Filler Plug 49 Nm (36 ft. lbs.)
Breather Plug 21 Nm (15 ft. lbs.)
Oil Deflector Set Bolt 7.4 Nm (65 inch lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.