Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS1999RX 300 AWD V6-3.0L (1MZ-FE)REPAIR AND DIAGNOSISMAINTENANCEALIGNMENTSPECIFICATIONS
1999 Lexus RX 300 AWD V6-3.0L (1MZ-FE)
Alignment: Specifications
1999 Lexus RX 300 AWD V6-3.0L (1MZ-FE)SECTION Specifications
Vehicle Height:
Front* 259 mm (10.20 inch)
Rear** 316 mm (12.44 inch)
FRONT:
Camber -0°20' ± 45' (-0.33° ± 0.75°)
Left-Right Error 45' (0.75°) Or Less
Caster 2°05' ± 45' (2.08° ± 0.75°)
Left-Right Error 45' (0.75°) Or Less
Steering Axis Inclination 12°10' ± 45' (12.17° ± 0.75°)
Left-Right Error 45' (0.75°) Or Less
Toe-In:
Total 0°06' ± 12' (0.1° ± 0.2°), 1 ± 2 mm (0.04 ± 0.08 inch)
Rack End Length Difference 1.5 mm (0.059 inch) Or Less
Wheel Angle:
Inside Wheel 31°03' ± 1°30' (31.05° ± 1.5°)
Outside Wheel:
Reference 27°50' (27.83°)
REAR:
Camber -0°35' ± 45' (-0.58° ± 0.75°)
Left-Right Error 45' (0.75°) Or Less
Toe-In:
Total 0°18' ± 12' (0.3° ± 0.2°), 3 ± 2 mm (0.12 ± 0.08 inch)
No.2 Lower Suspension Arm:
Length Difference 3.0 mm (0.118 inch) Or Less
* Measure The Distance From The Ground To The Center Of The Front Side Lower Suspension Arm Mounting Bolt.
** Measure The Distance From The Ground To The Center Of The Front Side Strut Rod Mounting Bolt.
Front* 259 mm (10.20 inch)
Rear** 316 mm (12.44 inch)
FRONT:
Camber -0°20' ± 45' (-0.33° ± 0.75°)
Left-Right Error 45' (0.75°) Or Less
Caster 2°05' ± 45' (2.08° ± 0.75°)
Left-Right Error 45' (0.75°) Or Less
Steering Axis Inclination 12°10' ± 45' (12.17° ± 0.75°)
Left-Right Error 45' (0.75°) Or Less
Toe-In:
Total 0°06' ± 12' (0.1° ± 0.2°), 1 ± 2 mm (0.04 ± 0.08 inch)
Rack End Length Difference 1.5 mm (0.059 inch) Or Less
Wheel Angle:
Inside Wheel 31°03' ± 1°30' (31.05° ± 1.5°)
Outside Wheel:
Reference 27°50' (27.83°)
REAR:
Camber -0°35' ± 45' (-0.58° ± 0.75°)
Left-Right Error 45' (0.75°) Or Less
Toe-In:
Total 0°18' ± 12' (0.3° ± 0.2°), 3 ± 2 mm (0.12 ± 0.08 inch)
No.2 Lower Suspension Arm:
Length Difference 3.0 mm (0.118 inch) Or Less
* Measure The Distance From The Ground To The Center Of The Front Side Lower Suspension Arm Mounting Bolt.
** Measure The Distance From The Ground To The Center Of The Front Side Strut Rod Mounting Bolt.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.