Power Seat Control Module: Service Precautions

1999 Lexus RX 300 AWD V6-3.0L (1MZ-FE)SECTION Service Precautions
Take care to observe the following precautions when performing inspections or removal and replacement of body electrical related parts.

MICRO COMPUTER PRESET DRIVING POSITION SYSTEM

Power Seat Control System
If the battery negative (-) terminal is disconnected, the preset driving positions stored in memory are erased, so be sure to note the positions and reset them after the battery terminal is reconnected.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.