Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS1997ES 300 V6-3.0L (1MZ-FE)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSSTEERINGSYSTEM SPECIFICATIONS
1997 Lexus ES 300 V6-3.0L (1MZ-FE)
System Specifications
1997 Lexus ES 300 V6-3.0L (1MZ-FE)SECTION System Specifications
P/S Belt Tension
New belt 150 - 185 lbs.
Used belt 95 - 135 lbs.
Steering Wheel Freeplay
With light finger pressure 30 mm (1.18 inch)
Steering Effort
Engine running; both directions 5.9 Nm (52 in.lbs.)
Steering Wheel Set Nut
Torque 35 Nm (26 ft.lbs.)
New belt 150 - 185 lbs.
Used belt 95 - 135 lbs.
Steering Wheel Freeplay
With light finger pressure 30 mm (1.18 inch)
Steering Effort
Engine running; both directions 5.9 Nm (52 in.lbs.)
Steering Wheel Set Nut
Torque 35 Nm (26 ft.lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.