Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS1997ES 300 V6-3.0L (1MZ-FE)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINEOIL PAN, ENGINE
1997 Lexus ES 300 V6-3.0L (1MZ-FE)
Oil Pan, Engine
1997 Lexus ES 300 V6-3.0L (1MZ-FE)SECTION Oil Pan, Engine
TIGHTENING SPECIFICATIONS
No.1 Oil Pan To Transaxle 37.2 Nm (27 ft.lb)
No.1 Oil Pan To Cylinder Block 19.5 Nm (14 ft.lb)
No.1 Oil Pan To Oil Pump
10 mm head 8.0 Nm (69 in.lb)
12 mm head 19.5 Nm (14 ft.lb)
No.1 Oil Pan To Rear Oil Seal Retainer 8.0 Nm (69 in.lb)
No.2 Oil Pan To No.1 Oil Pan 8.0 Nm (69 in.lb)
No.2 Oil Pan To Drain Plug 45.0 Nm (33 ft.lb)
Oil Pan Baffle Plate To No.1 Oil Pan 8 Nm (69 in.lb)
No.1 Oil Pan To Transaxle 37.2 Nm (27 ft.lb)
No.1 Oil Pan To Cylinder Block 19.5 Nm (14 ft.lb)
No.1 Oil Pan To Oil Pump
10 mm head 8.0 Nm (69 in.lb)
12 mm head 19.5 Nm (14 ft.lb)
No.1 Oil Pan To Rear Oil Seal Retainer 8.0 Nm (69 in.lb)
No.2 Oil Pan To No.1 Oil Pan 8.0 Nm (69 in.lb)
No.2 Oil Pan To Drain Plug 45.0 Nm (33 ft.lb)
Oil Pan Baffle Plate To No.1 Oil Pan 8 Nm (69 in.lb)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.