Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS1997ES 300 V6-3.0L (1MZ-FE)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINEENGINE MOUNT
1997 Lexus ES 300 V6-3.0L (1MZ-FE)
Engine Mount
1997 Lexus ES 300 V6-3.0L (1MZ-FE)SECTION Engine Mount
TIGHTENING SPECIFICATIONS
RH Engine Mount Bracket To Cylinder Block 28 Nm (21 ft.lb)
No.1 Engine Hanger To Air Intake Chamber 39 Nm (29 ft.lb)
No.1 Engine Hanger To RH Cylinder Head 39 Nm (29 ft.lb)
Rear Engine Mounting Insulator To Cylinder Block 64 Nm (47 ft.lb)
Front Engine Mounting Insulator To Cylinder Block 64 Nm (47 ft.lb)
RH Engine Mount To Water Outlet 32 Nm (23 ft.lb)
RH Engine Mount To Engine Moving Control Rod 32 Nm (23 ft.lb)
RH Engine Mount To No.2 RH Engine Mount Bracket 32 Nm (23 ft.lb)
Front Engine Mounting Insulator To Front Frame 80 Nm (59 ft.lb)
Engine Mount Absorber To Front Frame 48 Nm (35 ft.lb)
Engine Mount Absorber To Transaxle 48 Nm (35 ft.lb)
Rear Engine Mount Insulator To Front Frame 66 Nm (48 ft.lb)
LH Engine Mount Insulator To Transaxle 64 Nm (47 ft.lb)
Engine Moving Control Rod To RH Engine Mount Bracket 64 Nm (47 ft.lb)
Engine Moving Control Rod To RH Fender Apron 64 Nm (47 ft.lb)
RH Engine Mount Bracket To Cylinder Block 28 Nm (21 ft.lb)
No.1 Engine Hanger To Air Intake Chamber 39 Nm (29 ft.lb)
No.1 Engine Hanger To RH Cylinder Head 39 Nm (29 ft.lb)
Rear Engine Mounting Insulator To Cylinder Block 64 Nm (47 ft.lb)
Front Engine Mounting Insulator To Cylinder Block 64 Nm (47 ft.lb)
RH Engine Mount To Water Outlet 32 Nm (23 ft.lb)
RH Engine Mount To Engine Moving Control Rod 32 Nm (23 ft.lb)
RH Engine Mount To No.2 RH Engine Mount Bracket 32 Nm (23 ft.lb)
Front Engine Mounting Insulator To Front Frame 80 Nm (59 ft.lb)
Engine Mount Absorber To Front Frame 48 Nm (35 ft.lb)
Engine Mount Absorber To Transaxle 48 Nm (35 ft.lb)
Rear Engine Mount Insulator To Front Frame 66 Nm (48 ft.lb)
LH Engine Mount Insulator To Transaxle 64 Nm (47 ft.lb)
Engine Moving Control Rod To RH Engine Mount Bracket 64 Nm (47 ft.lb)
Engine Moving Control Rod To RH Fender Apron 64 Nm (47 ft.lb)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.