Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLEXUS1997ES 300 V6-3.0L (1MZ-FE)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSCOOLING SYSTEMRADIATOR
1997 Lexus ES 300 V6-3.0L (1MZ-FE)
Radiator
1997 Lexus ES 300 V6-3.0L (1MZ-FE)SECTION Radiator
SERVICE SPECIFICATIONS
Plate Height 7.4 - 7.8 mm (0.2959 - 0.3119 inch)
TIGHTENING SPECIFICATIONS
Radiator Support To Body 12.8 Nm (112 in.lb)
Cooling Fan Bolts 5.0 Nm (44 in.lb)
Plate Height 7.4 - 7.8 mm (0.2959 - 0.3119 inch)
TIGHTENING SPECIFICATIONS
Radiator Support To Body 12.8 Nm (112 in.lb)
Cooling Fan Bolts 5.0 Nm (44 in.lb)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.