Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLAND ROVER2009RANGE ROVER SPORT (LS) V8-4.4LREPAIR AND DIAGNOSISTECHNICAL SERVICE BULLETINSCUSTOMER INTERESTNAVIGATION SYSTEM - LANGUAGE DEFAULTS TO ENGLISH
2009 Land Rover Range Rover Sport (LS) V8-4.4L
Navigation System - Language Defaults To English
2009 Land Rover Range Rover Sport (LS) V8-4.4LSECTION Navigation System - Language Defaults To English
No: LTB00240
Issue: 1
Date: 04 NOV 2009
SECTION: 415
Navigation Language Changes to English
AFFECTED VEHICLE RANGE
CONDITION SUMMARY:
NOTE:
If the customer-selected language is English, no adverse effect will be evident.
Situation:
While using the High Level Display Front (HLDF) touchscreen and if the customer-selected language is not English, the language may inadvertently change from the selected language to English.
Action:
In the event of a customer concern of the above, refer to the Repair Procedure outlined below to update the Front entertainment control module software.
PARTS:
No parts necessary
TOOLS:
IDS with latest IDS DVD Patch File and latest calibration files
Midtronics PSC-550 Vehicle Power Supply
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
REPAIR PROCEDURE
UPDATE FRONT ENTERTAINMENT CONTROL MODULE SOFTWARE
CAUTION:
Ensure all ignition 'ON' / ignition 'OFF' requests are carried out; failure to perform these steps may cause damage to control modules in the vehicle.
CAUTION:
A Midtronics PSC-550 Vehicle Power Supply must be connected to the vehicle battery during IDS diagnosis / module programming.
NOTE:
When performing module software updates, if IDS displays 'no update required' , select 'tick', then select 'X' in the pop-up window to abort the routine. Diagnose as a separate claim.
1. Connect the Midtronics PSC-550 Vehicle Power Supply to the vehicle battery.
NOTE:
IDS must be loaded with software release DVD 118.5 with Patch File 19 or later and latest calibration files.
2. Connect the IDS to the vehicle and begin a new diagnostic session by entering the correct VIN for the current vehicle.
3. Follow the IDS prompts to read the vehicle configuration.
4. When prompted 'Do you wish to read diagnostic trouble codes?' select 'No'.
5. Select 'tick' to continue.
6. When Content Model is displayed, select the 'Vehicle Configuration' tab.
7. From the Vehicle Configuration menu, configure the Front entertainment control module by selecting:
^ 'Module programming' > 'Configure existing module' > 'Front entertainment control module'.
8. Follow all on-screen instructions until IDS displays the current and proposed software levels.
^ If 'Software update required' is displayed, select 'tick' to update the Front entertainment control module software, following all on-screen instructions to complete this task.
^ If 'No update required' is displayed select 'tick', then select 'X' in the pop-up window to abort the routine; exit the current session. Diagnose as a separate claim.
9. Exit the current session.
10. Disconnect IDS and the Midtronics PSC-550 Vehicle Power Supply from the vehicle.
Issue: 1
Date: 04 NOV 2009
SECTION: 415
Navigation Language Changes to English
AFFECTED VEHICLE RANGE
CONDITION SUMMARY:
NOTE:
If the customer-selected language is English, no adverse effect will be evident.
Situation:
While using the High Level Display Front (HLDF) touchscreen and if the customer-selected language is not English, the language may inadvertently change from the selected language to English.
Action:
In the event of a customer concern of the above, refer to the Repair Procedure outlined below to update the Front entertainment control module software.
PARTS:
No parts necessary
TOOLS:
IDS with latest IDS DVD Patch File and latest calibration files
Midtronics PSC-550 Vehicle Power Supply
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
REPAIR PROCEDURE
UPDATE FRONT ENTERTAINMENT CONTROL MODULE SOFTWARE
CAUTION:
Ensure all ignition 'ON' / ignition 'OFF' requests are carried out; failure to perform these steps may cause damage to control modules in the vehicle.
CAUTION:
A Midtronics PSC-550 Vehicle Power Supply must be connected to the vehicle battery during IDS diagnosis / module programming.
NOTE:
When performing module software updates, if IDS displays 'no update required' , select 'tick', then select 'X' in the pop-up window to abort the routine. Diagnose as a separate claim.
1. Connect the Midtronics PSC-550 Vehicle Power Supply to the vehicle battery.
NOTE:
IDS must be loaded with software release DVD 118.5 with Patch File 19 or later and latest calibration files.
2. Connect the IDS to the vehicle and begin a new diagnostic session by entering the correct VIN for the current vehicle.
3. Follow the IDS prompts to read the vehicle configuration.
4. When prompted 'Do you wish to read diagnostic trouble codes?' select 'No'.
5. Select 'tick' to continue.
6. When Content Model is displayed, select the 'Vehicle Configuration' tab.
7. From the Vehicle Configuration menu, configure the Front entertainment control module by selecting:
^ 'Module programming' > 'Configure existing module' > 'Front entertainment control module'.
8. Follow all on-screen instructions until IDS displays the current and proposed software levels.
^ If 'Software update required' is displayed, select 'tick' to update the Front entertainment control module software, following all on-screen instructions to complete this task.
^ If 'No update required' is displayed select 'tick', then select 'X' in the pop-up window to abort the routine; exit the current session. Diagnose as a separate claim.
9. Exit the current session.
10. Disconnect IDS and the Midtronics PSC-550 Vehicle Power Supply from the vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.