Front Disc Brakes

2009 Land Rover Range Rover Sport (LS) V8-4.4LSECTION Front Disc Brakes

Torque Specifications

Vehicles Without Brembo Brakes:

Brake Caliper Bleed Screw 14 Nm (10 ft. lbs.)
Brake Caliper To Anchor Plate Bolts 35 Nm (26 ft. lbs.)
Brake Disc Torx Screw 35 Nm (26 ft. lbs.)
Brake Caliper Anchor Plate To Wheel Knuckle Bolts 275 Nm (202 ft. lbs.)
Brake Hose Union 32 Nm (24 ft. lbs.)
Brake Hose Retaining Bracket To Wheel Knuckle Bolt 22 Nm (16 ft. lbs.)
Road Wheel Nuts 140 Nm (103 ft. lbs.)

Vehicles With Brembo Brakes:

Brake Caliper Bleed Screw 19 Nm (14 ft. lbs.)
Brake Disc Torx Screw 35 Nm (26 ft. lbs.)
Brake Caliper To Wheel Knuckle Bolts 275 Nm (202 ft. lbs.)
Brake Hose Union 32 Nm (24 ft. lbs.)
Brake Hose Retaining Bracket To Wheel Knuckle Bolt 22 Nm (16 ft. lbs.)
Road Wheel Nuts 140 Nm (103 ft. lbs.)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.