Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSLAND ROVER2009RANGE ROVER SPORT (LS) V8-4.4LREPAIR AND DIAGNOSISCRUISE CONTROLADJUSTMENTS
2009 Land Rover Range Rover Sport (LS) V8-4.4L
Cruise Control: Adjustments
2009 Land Rover Range Rover Sport (LS) V8-4.4LSECTION Adjustments
Speed Control Sensor Adjustment
Special Service Tools
NOTE:
^ Special tool 310-148 is graduated in 0.5 degree increments.
^ This procedure details how to adjust the speed control sensor vertically. There is no horizontal adjustment required.
1. Remove the front bumper cover. Front Bumper Cover (76.22.72)
2. Set the air suspension ride height to the STANDARD setting.
CAUTION: Drive the vehicle on to a flat, level surface.
3. Using the special tool, check the speed sensor is level, (± 0.5 degree).
4. Using the special tool, set the speed control sensor.
^ Rotate the vertical adjuster.
NOTE:
^ The speed sensor has no mechanical horizontal adjustment.
^ Do not release the securing nut.
5. Install the front bumper cover.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.