Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP1985CHEROKEE 4WD V6-173 2.8L VIN W 2-BBLREPAIR AND DIAGNOSISSPECIFICATIONSELECTRICAL SPECIFICATIONSDISTRIBUTOR, IGNITIONSYSTEM SPECIFICATIONS
1985 Jeep Cherokee 4WD V6-173 2.8L VIN W 2-bbl
System Specifications
1985 Jeep Cherokee 4WD V6-173 2.8L VIN W 2-bblSECTION System Specifications
| <Except Calif><Man. Trans> | <Except Calif><Auto Trans> | ||
| Rotation | C | C | |
| Centrifugal Advance | Advance Starts | 0 at 900 Degrees At RPM (deg @ rpm) | 0 at 900 Degrees At RPM (deg @ rpm) |
| Full Advance | 10 at 2500 Degrees At RPM (deg @ rpm) | 12 at 2500 Degrees At RPM (deg @ rpm) | |
| Vacuum Advance | Vacuum To Start Plunger | 3 Inch Of Mercury (in Hg) | 3 Inch Of Mercury (in Hg) |
| Max. Advance | 11 at 18 Degrees At Inches Mercury (deg @ in hg) | 9 at 18 Degrees At Inches Mercury (deg @ in hg) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.