Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP1985CHEROKEE 4WD L4-150 2.5L VIN U 1-BBLPARTS AND LABORMAINTENANCELABOR TIMES
1985 Jeep Cherokee 4WD L4-150 2.5L VIN U 1-bbl
Maintenance: Labor Times
1985 Jeep Cherokee 4WD L4-150 2.5L VIN U 1-bblSECTION Labor Times
| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes | |
| Service or Charge | ||||
| 7,500 Miles | 0.7 | 0.4 | C | For Procedure Information On Service Maintenance Schedules Refer To Appropriate Auto Repair/Tune-Up Manuals. |
| 15,000 Miles | 0.7 | 0.4 | C | For Procedure Information On Service Maintenance Schedules Refer To Appropriate Auto Repair/Tune-Up Manuals. |
| 22,500 Miles | 0.7 | 0.4 | C | For Procedure Information On Service Maintenance Schedules Refer To Appropriate Auto Repair/Tune-Up Manuals. |
| 30,000 Miles | 1.6 | 1.1 | C | For Procedure Information On Service Maintenance Schedules Refer To Appropriate Auto Repair/Tune-Up Manuals. |
| 37,500 Miles | 0.7 | 0.4 | C | For Procedure Information On Service Maintenance Schedules Refer To Appropriate Auto Repair/Tune-Up Manuals. |
| 45,000 Miles | 0.5 | 0.3 | C | For Procedure Information On Service Maintenance Schedules Refer To Appropriate Auto Repair/Tune-Up Manuals. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.