Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Cruise Control
1991 Jaguar XJ-6 L6-4.0LSECTION Cruise Control
NOTE: During a cruise control test JDS may instruct the operator to disconnect connector LB35 and perform a wire resistance check. JDS does not request that the operator reconnect LB35 after the resistance check.
Whenever LB35 is opened; a resistance reading is taken (using the reference and measurement probes); and, an additional measurement is requested: ALWAYS CONNECT LB35 BEFORE USE OF THE MEASUREMENT OR CURRENT PROBES.
Whenever LB35 is opened; a resistance reading is taken (using the reference and measurement probes); and, an additional measurement is requested: ALWAYS CONNECT LB35 BEFORE USE OF THE MEASUREMENT OR CURRENT PROBES.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.