Tool - Fuel Injection Tester

1991 Jaguar XJ-6 L6-4.0LSECTION Tool - Fuel Injection Tester
90jaguar07 JAGUAR FUEL INJECTION

TESTER
TOOLS, EQUIPMENT AND LITERAURE
NO: 27
Model: XJ-S, XJ 6, SER. III Date: SEPTEMBER, 1990

KEY POINTS: INTRODUCTION OF THE JAGUAR FUEL INJECTION TESTER
The Jaguar Electronic Fuel Injection Tester (YWB 900) is being introduced to test XJ-S and XJ6 Series III fuel injection systems. The tester, which is supplied by Lucas, performs the following functions:


^ Detects and stores static, dynamic and intermittent fuel injection faults on XJ-S and XJ6 Series III vehicles.

^ Displays and prints fault information.

^ Provides step by step diagnostic procedures using the system software and diagnostic guides.

^ The system incorporates a hand held tester and can be used to diagnose faults during an actual vehicle road test.


The Jaguar Fuel Injection Tester enables time saving, efficient fault detection and diagnosis by measuring inputs and outputs to the fuel injection system and provides results on a pass/fail basis. Simple diagnostic routines can then be performed which require a minimum of vehicle disassembly.

Pricing and shipping information for this tester will be issued shortly.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.