Torque Specifications

4.0L Torque Specifications

ALL TORQUE SPECIFICATIONS ARE IN MILLIMETERS

Alternator bolt- trunnion lock nuts ..........12-14 Nm

Alternator pivot bolt ........................23-27 Nm

Alternator pivot bolt nut ....................23-27 Nm

Banlo bolt to cylinder head ..................13-16 Nm

Camcover to cylinder head ...................9.5-12 Nm

Camshaft sprocket to camshaft ................23-27 Nm

Clip-hose to breather pipe .....................2.4 Nm

Connecting rod to big end nut .................52-55 Nm

Cylinder block drain plug .....................68-75 Nm

Cylinder head to cylinder block:

Tighten in sequence to ........................52-54 Nm

Rotate clockwise through exactly 90°

Dipstick to bracket .............................5-8 Nm

Distributor clamp plate to timing cover ......9.5-12 Nm

Exhaust manifold to cylinder head .............23-27 Nm

Heat shield to exhaust manifold ...............23-27 Nm

Heater pipe to cylinder head ..................23-27 Nm

Heater pine to inlet manifold ................9.5-12 Nm

Hose-bottom hose to water pump ..............3.8-4.3 Nm

Hose-expansion tank to water pump ...........2.5-3.5 Nm

Hose-heater return pipe to water pump .......2.5-3.5 Nm

Hose-water pump to thermostat housing .......2.5-3.5 Nm

Inlet manifold to cylinder head ...............23-27 Nm

Intake elbow to throttle housing ................2.4 Nm

Oil pump front cover to body .................9.5-12 Nm

Oil pump to cylinder block ....................23-27 Nm

Oil pump rear cover to body ..................9.5-12 Nm

Oil sump plug .................................41-47 Nm

Oil sump to cylinder block ....................23-27 Nm

Oil sump to timing cover ......................23-27 Nm

Power steering pump to mounting ...............23-27 Nm

Power steering pump to adaptor ................49-54 Nm

Top hose to thermostat housing ..............3.8-4.3 Nm

Transfer housing to cylinder block ............23-27 Nm

Windage tray to cylinder block ................23-27 Nm

Lower chain tensioner to cylinder block .......23-27 Nm

Lowerstatic damper to cyllnder block ..........23-37 Nm

Oil pump drive chain damper to block ..........23-27 Nm

Upper static damper to cylinder block .........23-27 Nm

Upper timing chain tensioner to block .........23-27 Nm

Lower left hand damper to cyllnder block ......23-27 Nm

Lower right hand damper to cylinder block .....23-27 Nm

Oil pump drive chain damper to block ...........3-27 Nm

Upper right hand damper to cyllnder block .....23-27 Nm

Upper timing chain tensioner to block .........23-27 Nm