Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJAGUAR1991XJ-6 L6-4.0LREPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTANTITHEFT AND ALARM SYSTEMSKEYLESS ENTRYKEYLESS ENTRY TRANSMITTERSERVICE AND REPAIR
1991 Jaguar XJ-6 L6-4.0L
Keyless Entry Transmitter: Service and Repair
1991 Jaguar XJ-6 L6-4.0LSECTION Service and Repair
Battery Replacement:
^ Carefully depress the spring tags through the openings in the case and remove the battery compartment cover from the handset body.
^ Remove the discharged battery cells.
^ Install three new battery cells, ensuring correct polarity is maintained.
^ Install handset battery cover onto the handset body (ensure spring tags click into position).
NOTE: To prevent complete battery discharge, batteries should be replaced (Fig. 2) at the 15,000 mile/12 month service interval. Use genuine Jaguar replacement batteries only, (JLM 1727).
^ Carefully depress the spring tags through the openings in the case and remove the battery compartment cover from the handset body.
^ Remove the discharged battery cells.
^ Install three new battery cells, ensuring correct polarity is maintained.
FIGURE 2:
^ Install handset battery cover onto the handset body (ensure spring tags click into position).
NOTE: To prevent complete battery discharge, batteries should be replaced (Fig. 2) at the 15,000 mile/12 month service interval. Use genuine Jaguar replacement batteries only, (JLM 1727).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.