Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJAGUAR1985VANDEN PLAS L6-4.2LREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTIGNITION SYSTEMIGNITION CABLESPECIFICATIONS
1985 Jaguar Vanden Plas L6-4.2L
Ignition Cable: Specifications
1985 Jaguar Vanden Plas L6-4.2LSECTION Specifications
Ignition Wires
No.
1 8.61k to 20.56k ohms
2 9.00k to 21.48k ohms
3 7.24k to 17.34k ohms
4 6.11k to 14.69k ohms
5 5.47k to 13.20k ohms
6 5.13k to 12.30k ohms
Coil lead 1.8k to 4.10k ohms
No.
1 8.61k to 20.56k ohms
2 9.00k to 21.48k ohms
3 7.24k to 17.34k ohms
4 6.11k to 14.69k ohms
5 5.47k to 13.20k ohms
6 5.13k to 12.30k ohms
Coil lead 1.8k to 4.10k ohms
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.