Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJAGUAR1985VANDEN PLAS L6-4.2LREPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGCONTROL ASSEMBLYDESCRIPTION AND OPERATIONMODE CONTROL VACUUM SWITCH
1985 Jaguar Vanden Plas L6-4.2L
Mode Control Vacuum Switch
1985 Jaguar Vanden Plas L6-4.2LSECTION Mode Control Vacuum Switch
Mode Control Vacuum Switch
Mode control vacuum switch activates defrost outlet actuators in DEFROST mode and closes lower heater flap by overriding linkage.
Switch is located behind radio panel with mode control microswitches.
Mode Control Switch:
Mode control vacuum switch activates defrost outlet actuators in DEFROST mode and closes lower heater flap by overriding linkage.
Switch is located behind radio panel with mode control microswitches.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.