Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2002Q45 V8-4.5L (VK45DE)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER HEAD ASSEMBLYSYSTEM SPECIFICATIONSGENERAL/SERVICE SPECIFICATIONSVALVE GUIDE - DIAMETER
2002 Infiniti Q45 V8-4.5L (VK45DE)
Valve Guide - Diameter
2002 Infiniti Q45 V8-4.5L (VK45DE)SECTION Valve Guide - Diameter
CYLINDER HEAD ASSEMBLY:
Valve guide hole diameter (for service parts)
Intake and exhaust: 10.175 - 10.196 mm (0.4006 - 0.4014 inch)
Press valve guide from camshaft side to dimensions as in illustration.
Using valve guide reamer, apply reamer finish to valve guide.
STANDARD
Intake and exhaust: 6.000 - 6.018 mm (0.2362 - 0.2369 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.