Sleep/Wake-Up Control

2002 Infiniti Q45 V8-4.5L (VK45DE)SECTION Sleep/Wake-Up Control

Sleep Control:




SLEEP CONTROL
"Sleep" control prevents unnecessary power consumption. After the following conditions are met, the BCM suspends the communication between itself and all LCU's. The whole IVMS is set in the "sleep" mode.
- Ignition switch "OFF"
- All electrical loads (in the IVMS) "OFF"
- Timer "OFF"

Wake-up Control:




WAKE-UP CONTROL
As shown above, when the BCM detects a "wake-up" signal, it wakes up the whole system and starts communicating again. The "sleep" mode of all LCU's is now canceled, and the BCM returns to the normal control mode. When any one of the following switches are turned ON, the "sleep" mode is canceled:
- All switches combined or connected with BCM
- All switches combined or connected with LCU
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.