Alignment: Specifications

2002 Infiniti Q45 V8-4.5L (VK45DE)SECTION Specifications
Alignment Front Camber -1 deg 30' - 0 deg 00'
Caster 5 deg 25' - 6 deg 55'
Kingpin Inclination Angle 13 deg 15' - 6 deg 55'
Toe-In In 2 - 0 mm
Rear Camber -1 deg 10' to -0 deg 10'
Toe-In In 4.4 - Out 1.2 mm
Wheelarch Height
(Unladen): Fuel, radiator coolant and engine oil full. Spare tire, hand tools and mats in designated positions.
Tire - Front (Hf) 255/55R17 728 mm
225/55R17
Runflat Tire
733 mm
245/45R18 727 mm
Tire - Rear (Hr) 255/55R17 704 mm
225/55R17
Runflat Tire
708 mm
245/45R18 699 mm
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.