Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2002Q45 V8-4.5L (VK45DE)REPAIR AND DIAGNOSISCRUISE CONTROLTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESSCAN TOOL TESTINGACTIVE TEST
2002 Infiniti Q45 V8-4.5L (VK45DE)
Active Test
2002 Infiniti Q45 V8-4.5L (VK45DE)SECTION Active Test
ACTIVE TEST
CAUTION: Do not perform the active test while driving.
Active test cannot be started while ICC system warning indicator illuminates.
1. Turn ignition switch OFF.
2. Connect CONSULT-II to data link connector and start engine.
3. Touch "START", "ICC", and "ACTIVE TEST" on CONSULT-II display in turn.
4. Touch necessary test item.
5. Touch "START".
6. Active test screen will be shown.
ICC Buzzer 1:
ICC Warning Lamp:
Meter Lamp:
Stop Lamp:
BOOSTER SOL/V 3:
BOOSTER SOL/V 3
Touch any of "MODE 1", "MODE 2", "MODE 3" to check that the operation condition is caused by operating monitor and brake pedal.
"START" is displayed 10 seconds after operation start. (Active test is completed.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.