Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2002I35 V6-3.5L (VQ35DE)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONSTIGHTENING SPECIFICATIONS
2002 Infiniti I35 V6-3.5L (VQ35DE)
Tightening Specifications
2002 Infiniti I35 V6-3.5L (VQ35DE)SECTION Tightening Specifications
Cylinder Block
Tightening Sequence
Tighten all bolts to 32 to 38 Nm (3.3 to 3.9 kg-m, 24 to 28 ft. lbs.).
Turn all bolts 90 to 95 degrees clockwise with angle wrench.
Connecting rod cap bolts
Step 1 19 - 21 Nm
Step 2 90 - 95° clockwise
Cylinder Block:
Cylinder Block:
Tightening Sequence
Tighten all bolts to 32 to 38 Nm (3.3 to 3.9 kg-m, 24 to 28 ft. lbs.).
Turn all bolts 90 to 95 degrees clockwise with angle wrench.
Connecting rod cap bolts
Step 1 19 - 21 Nm
Step 2 90 - 95° clockwise
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.