Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2002I35 V6-3.5L (VQ35DE)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSRELAYS AND MODULES - COMPUTERS AND CONTROL SYSTEMSTECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSCOMPUTERS/CONTROLS - REPROGRAMMING UTILIZING CONSULT(R)
2002 Infiniti I35 V6-3.5L (VQ35DE)
Computers/Controls - Reprogramming Utilizing CONSULT(R)
2002 Infiniti I35 V6-3.5L (VQ35DE)SECTION Computers/Controls - Reprogramming Utilizing CONSULT(R)
Classification: EC11-022A
Reference: ITB11-049A
Date: August 18, 2011
REPROGRAMMING WITH CONSULT
This bulletin has been amended. The statements below have changed. No other changes have been made. Please discard any previous copies.
APPLIED VEHICLES: All Infiniti vehicles with a reprogrammable ECU
SERVICE INFORMATION
If you have a reprogram that requires the use of CONSULT-II (C-II) and C-II is not available:
^ Refer to the chart below to determine CONSULT applicability.
CURRENT REPROGRAMMING APPLICABILITY CHART
Reprogramming C-II Loaner Program
(Available ONLY for reprogramming use)
^ Contact TECH LINE and they will determine if a C-II Loaner is needed. If so they will make arrangements for the loaner to be shipped.
^ Dealerships must return the C-II Loaner immediately after the reprogramming is completed.
^ If the Loaner is not returned within one week of delivery your FOM will be contacted to collect the unit.
Disclaimer
Reference: ITB11-049A
Date: August 18, 2011
REPROGRAMMING WITH CONSULT
This bulletin has been amended. The statements below have changed. No other changes have been made. Please discard any previous copies.
APPLIED VEHICLES: All Infiniti vehicles with a reprogrammable ECU
SERVICE INFORMATION
If you have a reprogram that requires the use of CONSULT-II (C-II) and C-II is not available:
^ Refer to the chart below to determine CONSULT applicability.
CURRENT REPROGRAMMING APPLICABILITY CHART
Reprogramming C-II Loaner Program
(Available ONLY for reprogramming use)
^ Contact TECH LINE and they will determine if a C-II Loaner is needed. If so they will make arrangements for the loaner to be shipped.
^ Dealerships must return the C-II Loaner immediately after the reprogramming is completed.
^ If the Loaner is not returned within one week of delivery your FOM will be contacted to collect the unit.
Disclaimer
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.