CAN System For TCS Models

System Diagram - For TCS Models:

Input/Output Signal Chart - For TCS Models:

ECM, Heater Unit:

TCM (Transmission Control Module):

ABS/TCS Control Unit:

System Description / For TCS Models
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability.

Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent).

In CAN communication, control units are connected with 2 communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads required data only.